You are here: Home » Products » Plastic Sheet Board Film Extrusion Line » PP Meltblown Nonwoven Fabric making machine

Product Category

loading

Share to:
sharethis sharing button

PP Meltblown Nonwoven Fabric making machine

GPM Machinery has recently developed the M Melt-blown Non-Woven Fabric Production Line. The main usages of melt-blown fabric are medium-efficiency and sub-high-efficiency filtration, including air filtration, sanitary filtration, and dust mask production, etc. Besides, it can also be used in making medical and sanitary products, industrial wiper, warm materials, oil-absorbing materials, battery separators, imitation leather base cloths, etc.
Quantity:
Inquire Add to Basket

  • GPM

GPM Machinery has recently developed the M Melt-blown Non-Woven Fabric Production Line. The main usages of melt-blown fabric are medium-efficiency and sub-high-efficiency filtration, including air filtration, sanitary filtration, and dust mask production, etc. Besides, it can also be used in making medical and sanitary products, industrial wiper, warm materials, oil-absorbing materials, battery separators, imitation leather base cloths, etc.
1) Introduction to the characteristics and advantages of the production line:
1. Adopting special hanger type and gas equalizing type spinning die, melt distribution is uniform.
2. The air pressure of the air nozzle is stable, the airflow on both sides is symmetrical, and the airflow in the width direction is uniform.
3. The specially designed hot air heating device has good heating efficiency and excellent heat exchange efficiency, and low energy consumption.
4. The fiber fineness and fabric surface are even. 6. High-voltage electrostatic electret treatment makes the melt-blown fabric have good filtering effect.
2）Technical parameters
1 Weight（g/m2) 20-100
2 Suitable materials PP（MFI 1500-1800)
3 Line speed（m/min) 10-60
4 Model    GM240 GM600 GM800 GM1200 GM1600
5 Melt-blown fabric size（mm)     175 525 700 1050 1600
6 Output（kg/24h)      150 350 500 900 1400

 3）Equipment list

1 Extruder
 		 Suitable for PP material(need melt pump for high output)
2 M type melt-blown die
 		 Special design, suitable for high-pressure gas laying
3 Special high-pressure air supply High-pressure air compressor or imported roots blower
4 Receiving cooling device Speed regulating synchronously with the production line, Teflon conveyor
5 Vacuum adsorption device
 		 Improve the melt-blown efficiency and quality
6 Air heating and drying system Customized air heater and moisture drying device
7 Slitting device
 		 According to the design, 4rolls/6rolls slitting
8 Winder
 		 Passive structure, switchable
9 Electrical cabinet for whole line
 		 SIEMENS PLC control or OMRON digital indicator, ABB inverter
10 High-voltage electrostatic electret device
 		 The core device for melt-blown fabric, improves the filtering rate

Previous: 
Next: